china semiconductor spec. no. corporation rev. product specification descriptions: led type : lighting led lamp led package : round led lamp emitting color red viewing angle 45 no stopper china semiconductor corporation opto plus technologi es co.,ltd address:2fl. no.909,chung-cheng road, address:696 s hun jiang rd.,ji shan st.shaoxing, chung-ho city taipei hsien,taiwan. zhejiang,china tel:886-2-2223-9696 tel:86-0575-88623888 fax:886-2-2223-9377 fax:86-0575-88623112 ps-ll-u508hr4-b0 a model no CSLR-U508HR4-A0 customer approved signatures approved by checked by prepared by http://www.csctw.com.tw
china semiconductor spec. no. corporation rev. features - 1. low power consumption. 3. high reliability and solid performance 4. optimal optical/mechanical design 5. rohs compliant device selection guide - package outline dimensions - tolerance unit page 1/5 ps-ll-u508hr4-b0 a led lens chip http://www.csctw.com.tw part no. CSLR-U508HR4-A0 water transparent alingap red material emitted color 2. high luminous output model no CSLR-U508HR4-A0 0.01 0.25 inch mm 25.4[1.00] min 2.54[0.100] 0.5 [0.020] 5.9 [0.232] 5 [0.197] 4.8 [0.189] 1 [0.039] 8.6 [0.339] 1.0[0.039] max 1.0[0.039] min
china semiconductor spec. no. corporation rev. absolute maximum rating - (ta=25 ) symbol unit pd mw i f ma i fp ma v r v topr tstg tsol * pulse width Q 0.1 msec. duty Q 1/10 electro-optical characteristics (ta=25 ) symbol min. typ. max. unit condition v f ----- 2.1 2.6 v i v 3900 7500 ----- mcd d ----- 625 ----- nm 2 ? 1/2 ----- 45 ----- deg i r ----- ----- 50 a v r =5v page 2/5 rating 52 5 http://www.csctw.com.tw 30 -30 ~ +80 -40 ~ +100 ps-ll-u508hr4-b0 a viewing angle i f =20ma operating temp. power dissipation forward current (dc) reverse voltage model no CSLR-U508HR4-A0 parameter lead soldering temperature forward voltage storage temp. peak forward current * 100 max. 260 for 5 sec max. (3mm from the epoxy body) luminous intensity parameter dominant wavelength reverse current
china semiconductor spec. no. corporation rev. part no.code min. max. t 3900 5100 u 5100 6600 v 6600 8600 w 8600 11200 x 11200 14600 part no.code min. max. r1 620 625 r2 625 630 r3 630 635 part no.code min. max. b 1.6 1.8 c 1.8 2.0 d 2.0 2.2 e 2.2 2.4 f 2.4 2.6 notes: 1. tolerance of measurement of luminous intensity :15 2. tolerance of measurement of color coordinates :0.01 3. tolerance of measurement of forward voltage :0.05v 4. all data are measured by csc's test equipment. 5. one delivery will include several color rank, vf ra nk and iv ranks of the products. 6. the quantity-ratio of the ranks is decided by csc . 7. please confirm with csc salesman,if your request different form standard specification. page 3/5 unit nm CSLR-U508HR4-A0 http://www.csctw.com.tw unit v dominant wavelength rank limits ( i f = 20ma ) unit mcd luminous intensity rank limits ( i f = 20ma ) CSLR-U508HR4-A0 forward voltage rank limits ( i f = 20ma ) CSLR-U508HR4-A0 model no CSLR-U508HR4-A0 ps-ll-u508hr4-b0 a
china semiconductor spec. no. corporation rev. typical electrical / optical charateristics curves - (ta = 25 unless otherwise noted) fig 6. page 4/5 http://www.csctw.com.tw model no CSLR-U508HR4-A0 ps-ll-u508hr4-b0 a fig 5. relative intensity vs. wavelength relative luminous intensity vs.radiation angle wavelength (nm) relative intensity @ 20ma 0 700 1.0 0.5 650 600 550 -90 relative luminosity radiation angle -60 -30 0 -30 -60 -90 1 0 0.5
china semiconductor spec. no. corporation rev. precautions for use - 1. recommended soldering conditions wave soldering 2. soldering iron basic spec. is Q 5sec. when 260 . if temperature is higher, time should be shorter (+10 -1sec.). power dissipation of iron should be smaller th an 15w , and temperature should be controllable. su rface temperature of the device should be under 230 . 3. static electricity a. static electricity or surge voltage damages leds.. it is recommended that a wrist band or an anit-elec trostatic glove be used when handling the leds. b. all devices, equipment and machinery must be prope rly grounded. it is recommended that mesures be taken against surge vo ltage to the equipment that mounts the leds. page 5/5 note: the specifications are subject to change witho ut notice. please contact us for updated information. http://www.csctw.com.tw ps-ll-u508hr4-b0 a model no CSLR-U508HR4-A0 260(max.) 250 240 temperature(c) time(sec.) preheat 105(max.) 0 max. 60sec. 5 sec.
|
